Brema HIKU26A Ice & water Dispenser 22kg Production Bench Top

Model Number: HIKU26A
Brand: Brema
Dimensions: 395mm Wide x 530mm Deep x 790mm High
Loading...

Brema’s Special Series HIKU26A 13g Ice Cube Maker produces 22kg per day of artisan crystalline ice cubes with 7kg of storage capacity while also featuring an ice dispenser. The elegant and impactful 13g Cube maximises profits by holding its temperature and melts vastly slower than its competitors, meaning your beverage on the rocks truly stays on the rocks.

Features:
  • 22kg per day ice production, 7kg of storage plus optical sensor ice dispenser
  • Ice Production is at rated ambient air temperature of 21°c with incoming water temperature of 15°c
  • Electromechanical operation that does not use Printed Circuit Boards
  • Designed to be installed on a bench or a stainless steel Brema HIKU TOWER
  • Air cooling system is rated at 21°C ambient and 15°C water
  • Stainless steel spray arms and internal filters are all detachable
  • Power: 10amp single phase plug supplied
  • This ice maker needs to be plumbed into the water supply & drain
Benefits:
  • Comes with its own water filter & pressure limiting valve, saving you over $300
  • No tools required or panels removed to clean spray arms and filters, meaning quick easy cleaning
  • 21°C ambient and 15°C water ratings give an accurate production average for the Australian climate
  • individual cube moulds gradually build cubes as it freezes for long lasting crystalline 13gram cubes
  • Utilises an optical sensor to dispense the ice making it completely hands-free
  • Perfect for Hotels, Hospitals, Canteens and any wher that optimum sanitation is a fundamental importance

Image for Brema 13g ice
Note: *For Warranty Compliance the water filter is to be replaced 6 monthly
*For prolonged life a service is recommended 6 monthly

Downloads

Click on the links below for further information on this resource.

Specification Sheet (883.62 KB)